Q+Termik
Thermal Paint
Protect and Save: Thermal Energy Paint,
the best shield against heat
Q+TERMIK OUTDOOR
Q+TERMIK Interior
Reduces heat leakage by improving insulation. This is achieved thanks to its higher opacity in the near infrared compared to other paints. In addition, it incorporates an active agent with silver ions (Ag+) that has bactericidal capacity, maintaining light reflection throughout the life of the paint as it does not darken.
What is Q+TERMIK for?
The main advantage is a temperature reduction of approximately 20% compared to similar paints in terms of opacity and whiteness, achieving up to 40°C of thermal difference from the exterior to the interior in the treated external areas.
This feature of Q+TERMIK allows energy savings in the areas where it is applied by not allowing so much temperature to pass through thermal transmission, since each degree that reduces the interior temperature of a house, means an energy saving of 7%.
Indications
- Suitable for application on any porous surface (for non-porous surfaces a primer is required, we recommend our Q+PRIMER).
- In case of application on already painted surfaces, remove those with poor adhesion or flaking.
- Do not dilute with water more than 10% and shake before use.
- At the time of application, surfaces must be dry and clean.
- Do not apply if rainfall is expected within two hours after application or at temperatures below 5°C.
- It is not recommended to wash the walls until 24 days have elapsed (dry to the touch 1h).
- It can be applied by brush, spray, roller or electrostatically.
In the case of a roof with solar panels, the reduction of the surface temperature improves the performance of the equipment since the electronics work at a lower temperature, between 10 °C and 20 °C, combined with the diffuse radiation that the panel receives from the treated surface, resulting in an increase in the performance of the panels of between 5 and 8%.
Regulation
Complies with Class A+ requirements of French Decree No. 2011-321 of March 23, 2011 of the French Ministry of Ecology, Sustainable Development, Transport and Housing; paint with minimal indoor emissions.
Physical properties
- Density at 20°C: 1.35 +-0.1 g/cm3
- Yield: from 5 to 10m2 depending on surface and application method.
- Dilution in water: maximum 10%.
- PH: 7.3-8.3
- Drying: Surface drying time, under normal conditions, is 1-2 hours.
- Resistance to wet rubbing: class 1 according to UNE-EN ISO 11998-2007
- Resistant to weathering and UV rays
Q+Termik applications
- Interiors and Exteriors
- Centers for public use
- Retailers
- Hospitals
- Residences
- Catering
- Daycare
- Schools
- Children’s rooms
- Spaces where sensitive people live
Technical Data Sheets
Safety Data Sheets
Testimonials and Recommendations
Heritage & Construction, a lasting legacy
Quimiplus Heritage & Construction embodies the convergence of innovation and historical respect, offering precision-engineered products designed to meet modern standards without compromising architectural authenticity.
Prioritizing durability and resistance, presenting the paints of the future pioneering energy efficiency, photocatalysis and antibacterial paints with unprecedented new technology to provide specialized restoration solutions.
It also stands out for its environmental commitment, using responsible formulations that minimize environmental impact.
Quimiplus Heritage & Construction not only builds and restores, but preserves, respecting and ensuring a lasting legacy for future generations.
Regulation
Complies with Class A+ requirements of French Decree No. 2011-321 of March 23, 2011 of the French Ministry of Ecology, Sustainable Development, Transport and Housing; paint with minimal indoor emissions.
Physical properties
- Density at 20°C: 1.35 +-0.1 g/cm3
- Yield: Approx. 10-12 m2/Kg depending on surface
- Dilution in water: maximum 10%.
- PH: 7.3-8.3
- Drying: Surface drying time, under normal conditions, is 1-2 hours.
- Resistance to wet rubbing: class 1 according to UNE-EN ISO 11998-2007
- Resistant to weathering and UV rays
